Cazza said:Here's my MOC, with his best friend.
20191222_172716.jpg
Mini99 said:And mine...
Those two look great together Andy, looking for those two myself.
Ruby2511 said:Beautiful moc's 8)
Here's my lovely loose one
20191222_175143.jpg
With his friends
20191222_175032.jpg
Snaketibe said:Ruby2511 said:Beautiful moc's 8)
Here's my lovely loose one
20191222_175143.jpg
With his friends
20191222_175032.jpg
Terrific stuff! I do love a little diorama :-D
Thanks for sharing.
TheJabbaWookie said:Here's my Kenner 20 back
Terrific collection Jeremy and really fascinating info on this one. In my opinion you have the early POCH version of Threepio. That red really pops. If that's the case you need the PBP 2 line coo slot screw variant in your life.Snaketibe said:Good old C-3PO. One of the first 12 figures, and actually one of the better likenesses from that initial run. As much as we might love them, Kenner's early efforts weren't exactly spot-on doppelgangers for the characters they represented, but C-3PO was better than most. It was another childhood favourite, and one of the main reasons I loved it then is the same reason I love it today; vac-metalizing! A technique Hasbro have increasingly abandoned in the modern line, I've always loved the fact (even before I knew the term or what it did) that Kenner used vac-metalizing to make C-3PO as shiny and therefore as movie-accurate as he is. For those who don't know, vac (or vacuum) metalizing is a method for coating a very thin layer of actual metal onto another surface, in this case the plastic body of old Goldenrod, and the end results are terrific!
Of course Kenner famously made a running change to C-3PO part-way through the Empire line, replacing the fixed limbs version with the removable limbs one, but that doesn't mean there aren't variants to be found with the fixed limbs version. Far from it in fact. In addition to various widths of leg stance which range from the very narrow to the Blackadder-esque heroically wide, Takara in Japan famously did their own unique and completely different sculpts of Darth Vader, the Stormtrooper and C-3PO, all of which featured a cross-head screw in the centre of the figures' backs, rather than (in the case of Threepio), a rivet. The Takara C-3PO is sometimes referred to as having a different head sculpt (which it certainly does; one which is both wider and looking distinctly upwards), but it's not just the head, but rather the entire figure which is a different sculpt.
There is also a very nice red-gold finish version made by PBP, which is a completely different (and IMHO much nicer) shade of gold than that found on regular C-3PO's. There are other shades of gold finish available, ranging from the almost silver through to the various matte gold variants released by Glasslite in Brazil, Lili Ledy in Mexico and PBP in Spain, the latter two of which had a flat-head screw in their backs. Plus of course there is the brightly painted yellow and brown Droids variant.
I don't have any of the matte finish variants or the Droids one (truth be told, I'm not really a fan of them), but I do have 6 loose variants, including (from left to right below) two wide stance, one medium stance and one narrow stance regular C-3PO's, plus a red-gold finish PBP, and lastly a Takara alternate sculpt C-3PO.
And to finish things off, my Palitoy 12-back C-3PO, which for once isn't a reseal ;-)
TheJabbaWookie said:Terrific collection Jeremy and really fascinating info on this one. In my opinion you have the early POCH version of Threepio. That red really pops. If that's the case you need the PBP 2 line coo slot screw variant in your life.Snaketibe said:Good old C-3PO. One of the first 12 figures, and actually one of the better likenesses from that initial run. As much as we might love them, Kenner's early efforts weren't exactly spot-on doppelgangers for the characters they represented, but C-3PO was better than most. It was another childhood favourite, and one of the main reasons I loved it then is the same reason I love it today; vac-metalizing! A technique Hasbro have increasingly abandoned in the modern line, I've always loved the fact (even before I knew the term or what it did) that Kenner used vac-metalizing to make C-3PO as shiny and therefore as movie-accurate as he is. For those who don't know, vac (or vacuum) metalizing is a method for coating a very thin layer of actual metal onto another surface, in this case the plastic body of old Goldenrod, and the end results are terrific!
Of course Kenner famously made a running change to C-3PO part-way through the Empire line, replacing the fixed limbs version with the removable limbs one, but that doesn't mean there aren't variants to be found with the fixed limbs version. Far from it in fact. In addition to various widths of leg stance which range from the very narrow to the Blackadder-esque heroically wide, Takara in Japan famously did their own unique and completely different sculpts of Darth Vader, the Stormtrooper and C-3PO, all of which featured a cross-head screw in the centre of the figures' backs, rather than (in the case of Threepio), a rivet. The Takara C-3PO is sometimes referred to as having a different head sculpt (which it certainly does; one which is both wider and looking distinctly upwards), but it's not just the head, but rather the entire figure which is a different sculpt.
There is also a very nice red-gold finish version made by PBP, which is a completely different (and IMHO much nicer) shade of gold than that found on regular C-3PO's. There are other shades of gold finish available, ranging from the almost silver through to the various matte gold variants released by Glasslite in Brazil, Lili Ledy in Mexico and PBP in Spain, the latter two of which had a flat-head screw in their backs. Plus of course there is the brightly painted yellow and brown Droids variant.
I don't have any of the matte finish variants or the Droids one (truth be told, I'm not really a fan of them), but I do have 6 loose variants, including (from left to right below) two wide stance, one medium stance and one narrow stance regular C-3PO's, plus a red-gold finish PBP, and lastly a Takara alternate sculpt C-3PO.
And to finish things off, my Palitoy 12-back C-3PO, which for once isn't a reseal ;-)
TheJabbaWookie said:I don't have one myself. But here are some great photos from the Javier Ruilopez PBP/Poch Made in Spain book. PBP figure on left, Kenner on right. Plus relevant Coo.
I've also sent you a PM
Cazza said:Here's my MOC, with his best friend.
20191222_172716.jpg
Mini99 said:And mine...
Those two look great together Andy, looking for those two myself.
Ruby2511 said:Beautiful moc's 8)
Here's my lovely loose one
20191222_175143.jpg
With his friends
20191222_175032.jpg
Snaketibe said:Good old C-3PO. One of the first 12 figures, and actually one of the better likenesses from that initial run. As much as we might love them, Kenner's early efforts weren't exactly spot-on doppelgangers for the characters they represented, but C-3PO was better than most. It was another childhood favourite, and one of the main reasons I loved it then is the same reason I love it today; vac-metalizing! A technique Hasbro have increasingly abandoned in the modern line, I've always loved the fact (even before I knew the term or what it did) that Kenner used vac-metalizing to make C-3PO as shiny and therefore as movie-accurate as he is. For those who don't know, vac (or vacuum) metalizing is a method for coating a very thin layer of actual metal onto another surface, in this case the plastic body of old Goldenrod, and the end results are terrific!
Of course Kenner famously made a running change to C-3PO part-way through the Empire line, replacing the fixed limbs version with the removable limbs one, but that doesn't mean there aren't variants to be found with the fixed limbs version. Far from it in fact. In addition to various widths of leg stance which range from the very narrow to the Blackadder-esque heroically wide, Takara in Japan famously did their own unique and completely different sculpts of Darth Vader, the Stormtrooper and C-3PO, all of which featured a cross-head screw in the centre of the figures' backs, rather than (in the case of Threepio), a rivet. The Takara C-3PO is sometimes referred to as having a different head sculpt (which it certainly does; one which is both wider and looking distinctly upwards), but it's not just the head, but rather the entire figure which is a different sculpt.
There is also a very nice red-gold finish version made by PBP, which is a completely different (and IMHO much nicer) shade of gold than that found on regular C-3PO's. There are other shades of gold finish available, ranging from the almost silver through to the various matte gold variants released by Glasslite in Brazil, Lili Ledy in Mexico and PBP in Spain, the latter two of which had a flat-head screw in their backs. Plus of course there is the brightly painted yellow and brown Droids variant.
I don't have any of the matte finish variants or the Droids one (truth be told, I'm not really a fan of them), but I do have 6 loose variants, including (from left to right below) two wide stance, one medium stance and one narrow stance regular C-3PO's, plus a red-gold finish PBP, and lastly a Takara alternate sculpt C-3PO.
And to finish things off, my Palitoy 12-back C-3PO, which for once isn't a reseal ;-)
User Car Salesman - 01.jpg
User Car Salesman - 02.jpg
User Car Salesman - 03.jpg
User Car Salesman - 04.jpg
User Car Salesman - 05.jpg
User Car Salesman - 06.jpg
User Car Salesman - 07.jpg
User Car Salesman - 08.jpg
User Car Salesman - 09.jpg
User Car Salesman - 10.jpg
TheJabbaWookie said:Here's my Kenner 20 back