Cardbacks with Correct Figure and accessory

Palifan

Sith Lord
Joined
Oct 28, 2012
Messages
4,902
TheJabbaWookie said:
Snaketibe said:
Palifan said:
Thanks Lars and I'll post some more up at a later date and make a mention of not being 100% sure on the first blaster.

You might be right about V4 and V5 and it's worth remembering that the pin head Han was released first and the Large head Han was a later release so the blasters may well have changed during the time difference between them.

Anyone else who has some thoughts on this then do let us know what you think, it's great to have all this info in one place though for the future.

Ian

I can help with a Palitoy Pin Head 12 back. Mine comes with a dark green V3:

V3 Dark Green.jpg

V3 Dark Green 2.jpg
Jeremy, this is great. This is more along the lines of what I would of expected. I'll pm you for more info in the next few days.


Just wondered if you think my Han one from the sealed Large Head Han cut card is a V5? You see to have an expert eye for these things so it would be good to know.

Ian
 

Cazza

Moderator
Staff member
Supporter
Joined
May 9, 2014
Messages
5,666
Location
Gloucestershire
Palifan said:
Power Droid Palitoy 20 (sorry I didn't picture the COO).

Here's the coo:
20210330_222912.jpg
 

Snaketibe

Grand Master
Supporter
Joined
Jan 16, 2016
Messages
5,383
Location
United Kingdom
Palifan said:
TheJabbaWookie said:
Snaketibe said:
I can help with a Palitoy Pin Head 12 back. Mine comes with a dark green V3:

V3 Dark Green.jpg

V3 Dark Green 2.jpg
Jeremy, this is great. This is more along the lines of what I would of expected. I'll pm you for more info in the next few days.


Just wondered if you think my Han one from the sealed Large Head Han cut card is a V5? You see to have an expert eye for these things so it would be good to know.

Ian

Hi Ian,

I believe you are correct. I would say your sealed Large head Han blaster is a V5, but would be interested to see if Jay agrees.

Jeremy
 

TheJabbaWookie

Sith Lord
Joined
Jun 28, 2017
Messages
2,740
Location
Somewhere Down The Rabbit Hole
Palifan said:
TheJabbaWookie said:
Snaketibe said:
I can help with a Palitoy Pin Head 12 back. Mine comes with a dark green V3:

V3 Dark Green.jpg

V3 Dark Green 2.jpg
Jeremy, this is great. This is more along the lines of what I would of expected. I'll pm you for more info in the next few days.


Just wondered if you think my Han one from the sealed Large Head Han cut card is a V5? You see to have an expert eye for these things so it would be good to know.

Ian
I would say it is the M4c mould off of Variant Villain. I have highlighted some of the identifying mould traits. The M4a and M4c are in my opinion the v4 mould off of TIG.
 

Attachments

  • BD51A385-7701-4CA3-AE4C-79C89AB678F6.jpeg
    BD51A385-7701-4CA3-AE4C-79C89AB678F6.jpeg
    128.6 KB · Views: 265
  • 1302E575-A6AD-4206-9123-6082F779D0B9.jpeg
    1302E575-A6AD-4206-9123-6082F779D0B9.jpeg
    150.5 KB · Views: 263

Pomse2001

Grand Master
Joined
Mar 13, 2012
Messages
16,102
Location
Denmark
TheJabbaWookie said:
Pomse2001 said:
Here are the other cardback that was sold with a rebel blaster Tri-logo Han Solo in trench coat

P1200517.JPG

P1200518.JPG

P1200519.JPG

P1200520.JPG

P1200521.JPG

P1200523.JPG

P1200524.JPG

P1200512.JPG

P1200513.JPG
Hi Lars. Sorry I missed this. The figure and trench coat are Smile. The top blaster is Smile so would have been paired with that. Which leaves the bottom one with your Luke XW like I mentioned previously.

No problem :D I was thinking maybe you were busy or maybe you had missed this :wink: Thanks that helped a lot :wink:
 

Pomse2001

Grand Master
Joined
Mar 13, 2012
Messages
16,102
Location
Denmark
TheJabbaWookie said:
Palifan said:
TheJabbaWookie said:
Jeremy, this is great. This is more along the lines of what I would of expected. I'll pm you for more info in the next few days.


Just wondered if you think my Han one from the sealed Large Head Han cut card is a V5? You see to have an expert eye for these things so it would be good to know.

Ian
I would say it is the M4c mould off of Variant Villain. I have highlighted some of the identifying mould traits. The M4a and M4c are in my opinion the v4 mould off of TIG.

Thanks for sharing this, very interresting stuff 8)
 

theforceuk

Grand Master
Supporter
Joined
Apr 3, 2014
Messages
8,749
Lobot Trilogo Hong Kong. Figure and card are certainly matching from my childhood, no idea about the blaster!
 

Attachments

  • image.jpg
    image.jpg
    110.6 KB · Views: 253
  • image.jpg
    image.jpg
    105.6 KB · Views: 242
  • image.jpg
    image.jpg
    94 KB · Views: 244
  • image.jpg
    image.jpg
    84.5 KB · Views: 245
  • image.jpg
    image.jpg
    140.8 KB · Views: 250

Palifan

Sith Lord
Joined
Oct 28, 2012
Messages
4,902
TheJabbaWookie said:
Palifan said:
TheJabbaWookie said:
Jeremy, this is great. This is more along the lines of what I would of expected. I'll pm you for more info in the next few days.


Just wondered if you think my Han one from the sealed Large Head Han cut card is a V5? You see to have an expert eye for these things so it would be good to know.

Ian
I would say it is the M4c mould off of Variant Villain. I have highlighted some of the identifying mould traits. The M4a and M4c are in my opinion the v4 mould off of TIG.


This is great to see and I agree that the loose blaster does look like V4 (M4a/M4c) but do you not think that the sealed cut card one might also be this issue of blaster?

Ian
 

TheJabbaWookie

Sith Lord
Joined
Jun 28, 2017
Messages
2,740
Location
Somewhere Down The Rabbit Hole
Yes I believe you're right. We haven't seen a Kenner 12 back small head Han with a M4 rebel blaster but Palitoy 12 backs were released later than US 12 backs.

I don't know much about Palitoy 12 backs but guessing the large head Han is much rarer on 12 backs than small head Han just like Kenner.

Guess it's also possible it could of been carded later in the line using excess 12 back cards.
 

Palifan

Sith Lord
Joined
Oct 28, 2012
Messages
4,902
TheJabbaWookie said:
Yes I believe you're right. We haven't seen a Kenner 12 back small head Han with a M4 rebel blaster but Palitoy 12 backs were released later than US 12 backs.

I don't know much about Palitoy 12 backs but guessing the large head Han is much rarer on 12 backs than small head Han just like Kenner.

Guess it's also possible it could of been carded later in the line using excess 12 back cards.

The Large Head Han was certainly released late in the line so it's possible that it was carded using excess card backs and might be why it possibly has this V4 blaster. It would be good to see what the sealed Palitoy 12 back pin heads came packed with if there are any others to compare with Jeremy's.

Ian
 

Pomse2001

Grand Master
Joined
Mar 13, 2012
Messages
16,102
Location
Denmark
Palifan said:
TheJabbaWookie said:
Yes I believe you're right. We haven't seen a Kenner 12 back small head Han with a M4 rebel blaster but Palitoy 12 backs were released later than US 12 backs.

I don't know much about Palitoy 12 backs but guessing the large head Han is much rarer on 12 backs than small head Han just like Kenner.

Guess it's also possible it could of been carded later in the line using excess 12 back cards.

The Large Head Han was certainly released late in the line so it's possible that it was carded using excess card backs and might be why it possibly has this V4 blaster. It would be good to see what the sealed Palitoy 12 back pin heads came packed with if there are any others to compare with Jeremy's.

Ian

I agree let us hope more will be shared in the thread so we can learn more, this is very interesting reading guys, I wish I had some 12 back moc so I could help :wink:
 

theforceuk

Grand Master
Supporter
Joined
Apr 3, 2014
Messages
8,749
Tie Fighter Pilot on Trilogo Hong Kong card, figure and card are from childhood no idea about blaster!
 

Attachments

  • image.jpg
    image.jpg
    111 KB · Views: 368
  • image.jpg
    image.jpg
    85.3 KB · Views: 367
  • image.jpg
    image.jpg
    153.7 KB · Views: 371

theforceuk

Grand Master
Supporter
Joined
Apr 3, 2014
Messages
8,749
Lando Trilogo, figure and card back are matching helmet was purchased from eBay in the late 00's and staff I'm really not sure.
 

Attachments

  • image.jpg
    image.jpg
    95.3 KB · Views: 350
  • image.jpg
    image.jpg
    108.9 KB · Views: 348
  • image.jpg
    image.jpg
    114.9 KB · Views: 349

theforceuk

Grand Master
Supporter
Joined
Apr 3, 2014
Messages
8,749
8D8 Trilogo. Both acquired from my childhood so 100% matching.
 

Attachments

  • image.jpg
    image.jpg
    103.5 KB · Views: 347
  • image.jpg
    image.jpg
    99.3 KB · Views: 347
  • image.jpg
    image.jpg
    149.2 KB · Views: 347

theforceuk

Grand Master
Supporter
Joined
Apr 3, 2014
Messages
8,749
Prune Face on Trilogo card all from childhood so 100% matching.
 

Attachments

  • image.jpg
    image.jpg
    115.5 KB · Views: 348
  • image.jpg
    image.jpg
    96.6 KB · Views: 349
  • image.jpg
    image.jpg
    129.9 KB · Views: 351

theforceuk

Grand Master
Supporter
Joined
Apr 3, 2014
Messages
8,749
Trilogo AT-ST, figure and card back a match, not sure about blaster.
 

Attachments

  • image.jpg
    image.jpg
    123.2 KB · Views: 348
  • image.jpg
    image.jpg
    112 KB · Views: 347
  • image.jpg
    image.jpg
    94.3 KB · Views: 346
  • image.jpg
    image.jpg
    138.1 KB · Views: 347

Latest posts

Top Bottom